News

How to maintain the Mold Water Transport Joint during use?

Publish Time: 2024-06-07
During the use of Mold Water Transport Joint, proper maintenance and care are required to ensure its normal operation and extend its service life. The following are some detailed steps and precautions for the maintenance of Mold Water Transport Joint:

1. Regular inspection

Connection status: Regularly check the connection status of the water transport joint with the mold, injection molding machine and other components to ensure that there is no looseness or leakage. This helps prevent the cooling effect from decreasing or water leakage caused by poor connection.

Sealing: Check the sealing of the joint, especially the integrity of the sealing ring and gasket. If damage or aging is found, it should be replaced in time.

2. Cleaning and maintenance

Surface cleaning: Regularly clean the surface of the water transport joint to remove impurities such as oil and scale to keep it clean. This helps to improve the heat dissipation performance of the joint and prevent corrosion.

Internal cleaning: For the dirt and impurities accumulated inside, high-pressure water jet or chemical cleaning can be used for cleaning. However, it should be noted that during the chemical cleaning process, a suitable cleaning agent should be selected and the operating procedures should be strictly followed to avoid damage to the joint.

3. Replacement and repair

Replacement of sealing ring: If the sealing ring is found to be aging or damaged, a new sealing ring should be replaced in time. When replacing, a sealing ring that matches the joint model should be selected and ensured to be installed correctly.

Joint repair: For joints with slight damage or deformation, repair measures can be used to deal with them. Such as grinding, welding and other methods, but it should be noted that the repaired joint should meet the use requirements.

4. Precautions

Avoid high temperature: During maintenance, the water transport joint should be avoided from being exposed to high temperature environments to avoid damage to it.

Use professional tools: During disassembly, installation and maintenance, professional tools should be used to operate to avoid unnecessary damage to the joint.

Comply with operating procedures: During maintenance, operating procedures and safety requirements should be strictly followed to ensure the safety of personnel and equipment.

In summary, the performance and service life of the Mold Water Transport Joint can be effectively maintained through regular inspection, cleaning and maintenance, replacement and repair. At the same time, during maintenance, it is also necessary to pay attention to complying with operating procedures and safety requirements to ensure the safety of personnel and equipment.
×

Contact Us

captcha